The Chrysler 300 has one of the most powerful engines in its category, making it one of the popular vehicles on the road. Before buying any vehicle, it is best to know its reliability and the common problems over the years. It is crucial to know that not all Chrysler vehicles are perfect, and most of them have some minor issues. When you learn about these common problems, you can choose a better model and make the vehicle.
Most Common Problems of the Chrysler 300
Vehicle Stalling
Electrical issues often cause a Chrysler 300 to stall, and a vehicle that suddenly stalls increases the risk of accidents on the road. The stalling problems that affect the Chrysler usually happen when shifting gears, turning, or driving at slow speeds.
Rough Gear Shifting
Most Chrysler 300 owners have complained that gear shifting can be rough and jerky at times. Shifting the vehicle beyond the second gear or shifting it out of park mode gets difficult.
Buzzing Sounds and Shudder Vibration
Buzzing sounds or shudder vibrations often get reported during acceleration. The sound or vibration typically occurs when shifting to the 3rd, 4th or 5th gear.The reason for this problem is when the transmission fluid gets contaminated. The contamination could get caused due to leakage of water from the transmission tube.
Transmission Fluid Leak
Even though a transmission fluid leak doesn't cause significant problems, it can affect the overall performance of the Chrysler 300 in the long run. Apart from transmission issues, the fluid leak could result in rough gear shifting.
Uconnect Infotainment System Gets Frozen with Blank Screen
The infotainment system freezes or boots into a blank screen when the vehicle is in reverse. The system becomes unresponsive to the touch, or it starts rebooting multiple times.The other problem most Chrysler 300 owners face is that the infotainment system might jump between the different input sources. The radio reception isn't good, and the USB media drives might not get recognized.
Active Head Restraints (AHR) Deploys Without Warning
The active head restraints tend to get deployed randomly when the Chrysler 300 gets in a rear-end collision. The bracket that holds the AHR tends to break if there is sustained pressure. When the AHR strikes the occupants of the car unexpectedly, it can cause neck injuries. The low-quality plastic brackets are not reinforced, and this results in the auto component breaking.
Door Panels Get Wrapped
The door panels can warp and melt in the sun, and it is most likely to happen when the windows and panels meet. The problem often gets caused due to poor installation and cheap quality materials.A warped panel can create other problems like interference with side airbag deployment. Apart from this, it can cause considerable damage to the cooling and heating systems of the car.
When the door panels get wrapped, it prevents the anti-theft and door-lock systems from getting activated. A defective board is one of the most common problems most Chrysler owners have to deal with nowadays. When the car looks wrapped, it loses its sale value too.
Dangerous Airbags
The inflators tend to get unstable with time, and this causes them to explode or rupture when the airbag gets deployed. The explosion results in metal fragments shooting inside the cabin.There have been numerous instances where the explosion of inflators has resulted in the death of the Chrysler 300 owners. Gain more knowledge about the model and make of the car that is susceptible to this problem.
Confusing Electronic Shifter
The electronic shifter is too confusing to use. Due to the bad design of the shifter, most Chrysler 300 owners find their car rollaway after putting it in parking.The gear shifter is monostable due to which when you push the lever up or down, it will come back to the centre. The clicks you find between gears is hard to detect, and the driver may feel that the gear selector hasn't moved.
Due to this problem, the drivers of the Chryslers end up in neutral when they want to be in drive, and the car also reverses when it is supposed to be in the park.
Electrical Nightmares
A wide range of electrical nightmares gets caused by Chrysler's integrated power module system (TIPM). The electrical problems can result in the fuel pump being unable to send fuel to the engine.The other common problems caused by electrical failure include airbags deploying randomly and the horn going off suddenly. The TIPM must work efficiently to distribute power safely to all the auto components.
If the power distribution is uneven or no distribution, the car's electrical systems will stop working. You will lose control of most vehicle auto parts and accessories, which can be disastrous on the road.
Oil Sludge in Engine
When the engine oil thickens, it gets known as sludge. It increases heart and friction, and this might lead to engine failure. Every car needs engine oil to run and perform its best. When the engine oil becomes thick, it can lead to many problems. The thick coat of oil retains heat, harming the car's mechanical parts, including the engine.
The most common signs of oil sludge in your car engine include the piston failing, engine stalling, loss of oil pressure, and engine knocking. Poor acceleration and poor gas mileage are also standard when oil sludge starts damaging the engine. If your car's engine doesn't perform efficiently, it can affect the safety of all those in the Chrysler 300. With proper care and maintenance, you can solve this problem from recurring.
Most often, the common problems of Chrysler 300 vary in different models and make of the car. While one model or make of the vehicle might have a specific issue, the other model and make may not have that problem altogether. You must be aware of the car problems and the models and make of vehicles that have them. It will help you choose wisely and save you valuable time and money.